Показать сокращенную информацию
dc.contributor.author | Баричко, Б. В. | |
dc.contributor.author | Космацкий, Я. И. | |
dc.contributor.author | Barichko, B. V. | |
dc.contributor.author | Kosmatsky, Y. l. | |
dc.creator | Южно-Уральский государственный университет | ru_RU |
dc.creator | South Ural State University | en |
dc.date.accessioned | 2012-01-27T03:34:38Z | |
dc.date.available | 2012-01-27T03:34:38Z | |
dc.date.issued | 2010 | |
dc.identifier.citation | Баричко, Б. В. Снижение расходного коэффициента при изготовлении труб / Б. В. Баричко, Я. И. Космацкий // Вестник ЮУрГУ. Серия Металлургия.- 2010.- Вып. 15. № 34.- С. 68-70 | ru_RU |
dc.identifier.uri | http://dspace.susu.ac.ru/handle/0001.74/1152 | |
dc.description.abstract | Представлена постановка задачи на снижение расходного коэффициента при производстве труб по маршруту прессование - редуцирование. Проанализированы возможные способы устранения утолщения стенки на заднем участке. Получены аналитические зависимости для определения параметров пресс-иглы, позволяющие проектировать профилировку рабочего инструмента при изготовлении труб с устранением утолщения стенки на заднем участке. Problem statement of decrease of discharge coefficient in manufacture of pipes on a pressing - reduction route is presented. Possible ways of elimination of wall thickening on the back part are analysed. Analytical dependences for determination of parameters of the press needle are received, allowing to project profiling of the working tool at manufacturing of pipes with elimination of wall thickening on the back part. | ru_RU |
dc.language | ru | en |
dc.publisher | Издательский центр ЮУрГУ | ru_RU |
dc.relation.ispartof | Вестник ЮУрГУ. Серия Металлургия | ru_RU |
dc.relation.ispartof | Vestnik Yuzhno-Ural'skogo Gosudarstvennogo Universiteta. Seriya Metallurgiya | ru_RU |
dc.relation.ispartof | Bulletin of SUSU | en |
dc.relation.ispartofseries | Металлургия;Вып. 15 | |
dc.subject | прессование металлов | ru_RU |
dc.subject | редуцирование труб | ru_RU |
dc.subject | параметры пресс-иглы | ru_RU |
dc.subject | утолщение стенки трубы | ru_RU |
dc.subject | УДК 621.774.38 | ru_RU |
dc.subject | pressing of metals | ru_RU |
dc.subject | reduction of pipes | ru_RU |
dc.subject | parameters of the press needle | ru_RU |
dc.subject | pipe wall thickening | ru_RU |
dc.subject | производство труб | ru_RU |
dc.title | Снижение расходного коэффициента при изготовлении труб | ru_RU |
dc.title.alternative | Decreasing the discharge coefficient in manufacture of pipes | ru_RU |
dc.type | Article | ru_RU |